Daytona

Seat Repair Sticker, 110x170mm, Gloss Black

You can place torn bike seat in seal repair easily. Acrylic based adhesive tape with polyester film used as minimizing also the ingress of water. Material: combination skin; acrylic based adhesive...

Seat Repair Sticker, 110x170mm, Gloss Brown

You can place torn bike seat in seal repair easily. Acrylic based adhesive tape with polyester film used as minimizing also the ingress of water. Material: combination skin; acrylic based adhesive...

Seat Repair Sticker, 210mm x 300mm, Rough, Gloss Black

Repair damaged seats easily. Acrylic based adhesive tape with polyester film which will limit the ingress of water into the repair. Material: combination skin; acrylic based adhesive tape Size: 110 x...

Seat Repair Sticker, 210mm x 300mm, Rough, Matt Black

Repair damaged seats easily. Acrylic based adhesive tape with polyester film which will limit the ingress of water into the repair. Material: combination skin; acrylic based adhesive tape Size: 110 x...

Seat Repair Sticker, 210x300mm, Fine, Matt Black

You can place torn bike seat in seal repair easily. Acrylic based adhesive tape with polyester film used as minimizing also the ingress of water. Material: combination skin & acrylic based...

Seat Repair Sticker, 210x300mm, Fine, Matt Pitch Black

You can place torn bike seat in seal repair easily. Acrylic based adhesive tape with polyester film used as minimizing also the ingress of water. Material: combination skin; acrylic based adhesive...

Seat Repair Sticker, Fine, Matt Black, 110x170

Regular SizeSurface Treatment: Coarsh MeshSize: 110×170mmMaterial: Synthetic Leather & Acrylic Adhesive Tape

Seat with Base, Lined, Yamaha SR400, SR500

Pattern: RollColor: Blackwith Seat BaseCompared measurement to the STD Parts: Approximately 45mm DownOverall Length: Approximately 615mm x Overall Width: Approximately 280mm*The compared measurement...

Secondary Side Wet Type/Dry Type Clutch Kit, Hose Clamp Set

Quantity: 1pc.[Corresponding to picture No: 27]

Semi Radial Brake Master Cylinder Kit (Angle Horizontal 19 Degrees)

Type: Diagonal WidePiston Diameter: Φ19 (3/4-inch) [*Horizontal Type 5/8-inch Equivalent]Body Colour: BlackLever Colour: SilverCorresponding Handlebar Diameter: Φ22. 2Lever Adjust (It is...

Sensor Fitting for Oil Balance M16 x P1.5

Bolt Size: M16 x P1.5Sensor Mounting Part: R1/8 Used with OEMOil pan drain bolt etc replaced.DAYTONA company Temp meter attached Thermistor (Taper Screw Sensor) Can be installed directly  ...

Sensor Fitting for Oil Temp M14 x P1.25

Bolt Size: M14 x P1.25Sensor Mounting Part: R1/8 Used with OEMOil pan drain bolt etc replaced.DAYTONA company Temp meter attached Thermistor (Taper Screw Sensor) Can be installed directly.