Jerry Can 2.5 Litre, Water, Oil, Fuel Container

Homologated Jerry can with 2.5 Litre capacity.  Suitable for the transportation of fuel, water or oil. Can be mounted to the Trekker Outback boxes with the GI E148 holder or standard Trekker boxes with E149 holder. Not Included and can be...

Hose Stopper

For plugging hoses

Tuning Sub Gasoline Tank

Capacity: 2LGasoline Hose(Length 1000mm) Use when it is necessary to adjust the engine by removing Fuel Tank

Daytona Chain Adjustment Ring Spanner (Honda Pro Arm)

Honda Pro Arm dedicated chain adjuster Plate thickness: 4.5mm Corresponding ring diameter: approx. 120mm

Daytona Magnet Rotor & Flywheel Puller M30 x P1.5

Special tool for removing the magnetic rotor. M30 x P1.5 Standard Screw (female screw). Body double-sided width: 30mm. Bolt hexagonal double-sided width: 17mm. Fits HONDA CROSS CUB JA10 HONDA GROM HONDA MSX 125 HONDA SUPER CUB110 It is...

Compact Silicone Funnel

Material: Silicone Height: 55-130mm (using and non-using sizes). Outer diameter: 80mm. Ideal for injection of engine oil and coolant solution.

Wrench, Oil Filter, BMW

Cartridge type tool for oil filter removal Corresponding element parts number: 1142767354 3/8 inch (9.5 mm) square socket wrench compatible.   Fits: BMW R1200GS, BMW R1200R, BMW R1200ST and others

Slide Type Ring Spanner

Ring nut spanner with suspension and steering shaft. 35mm to 75mm supported. The tip thickness is thin, 4.5 mm.

Daytona Clutch Lock Nut Socket 25mm

Size: Outer Diameter 25mm x Inner Diameter 19mm Unlike double-mouth type, Offset tends to force Smaller force Lock Nut Wrench. Clutch disassembly of HONDAMini bike, Lock nut at assembly (Clutch center nut) It is necessary for relaxing and...

Wrench, Oil Filter, Harley Davidson #44295, V-Rod Evo, Twin Cam Daytona

for HARLEY-DAVIDSON OEM (It correspond to Evolution/Twin CAM88 Engine Filter.)3/8-inches (9.5mm) Hexagon Socket Wrench Corresponding Product Cartridge type Oil Filter Dedicated tool for removal. OEM and DAYTONA Cartridge Type Oil Filter available...

Clutch Lock Nut Socket 30mm x 25 mm For Honda Mini Bike

Socket for loosening and tightening of lock nut (clutch centre nut) at disassembling / assembling clutch of Honda mini bike. Fits to two types of locknuts (4 claws small inner diameter 5.3mm nut) with outer diameter 30mm × inner diameter 24.6mm and...

Bike Lift limited edition rear stand - Gresini Racing

Developed in cooperation with the Gresini Racing MotoGP Team, these limited edition rear race stands are beautifully crafted in full aluminium with large diameter wheels and high level components throughout.  Made in Italy. Note: Due to the size of...