New Zealand Dollars
Brazilian Real
United States Dollars
Australian $
Japan Yen
Product Description
Comes with English Instructions (not Japanese)
Type: Slide Type
Thickness: 13.5mm
Maximum Rating: DC12V/15A(180W)
Handlebar Diameter: o22.2/o25.4
Thickness: 13.5mm
Maximum Rating: DC12V/15A(180W)
Handlebar Diameter: o22.2/o25.4
Thin type ON/OFF Switch, 4 types.
Slim ON/OFF Switch with a thickness of 13.5mm that can be attached to the SMART on the car body with a luxurious design (Handlebar Clamp Type) Though it is a thin Body, it is the largest Large rated DC 12 V/15 A (180W) Corresponding to the Large electric power up to, it can be used for various electrical components.
There are 4 types of SwitchVariation.
Handlebar OD φ22.2/φ25.4 Can be clamped to either.
Slim ON/OFF Switch with a thickness of 13.5mm that can be attached to the SMART on the car body with a luxurious design (Handlebar Clamp Type) Though it is a thin Body, it is the largest Large rated DC 12 V/15 A (180W) Corresponding to the Large electric power up to, it can be used for various electrical components.
There are 4 types of SwitchVariation.
Handlebar OD φ22.2/φ25.4 Can be clamped to either.
* You may not be able to use till maximum rated value depending on the temperature of the used environment.
* When used at large current, the attached wiring will get heated but it's not abnormal.
* The maximum electric current value is 15A. It will not change even if you use it at 6V.
* You cannot use at 24V.
* The rated value current of attached wire connector (red) is 7A. When using it at over 80W, use commercially sold plug receptacle or connect it with soldering.
* Use attached rubber spacer if clamping to handle of outer diameter 22.2mm.
* Do not over tighten the screw. Since it is made of resin, you will damage the resin if over tightened.
* The shown image is button see-saw type.
* When used at large current, the attached wiring will get heated but it's not abnormal.
* The maximum electric current value is 15A. It will not change even if you use it at 6V.
* You cannot use at 24V.
* The rated value current of attached wire connector (red) is 7A. When using it at over 80W, use commercially sold plug receptacle or connect it with soldering.
* Use attached rubber spacer if clamping to handle of outer diameter 22.2mm.
* Do not over tighten the screw. Since it is made of resin, you will damage the resin if over tightened.
* The shown image is button see-saw type.
Japan Product ID: 79341
Product Videos
Custom Field
Tax GST Exclusive
