Product Description
Torque Camshaft 45-degrees
Driven Assembly of Flat face to avoid the fall of V Belt at high speed GEAR to avoid Trouble.
Torque Camshaft department is made by DAYTONA Variable Pulley (71073) +Reinforced V Belt (61171) We made it the optimum angle at the time of simultaneous wearing.
Face face angle is set to OEM same etc.
・Type1 (Torque Camshaft 45°) Improvement of the feeling feeling of the acceleration characteristic & Throttle response in the low and medium speed range because the speed change speed is close to OEM (* Not exactly the same) , Center spring OEM, or 3% UP (62289/74053) It is possible to set from.
・TYPE 2 (Torque Camshaft 55°) The speed increase is obtained according to the rise of the engine speed in the high speed range.The speed change speed is OEMDriven or Type 1 (73250) , So the Center spring is 10% UP (62290/74054) Recommended to be set from.
● Weight Roller should be set to 13 g × 6 or less as a guide.
● OEM, or our Center spring compatible product.
- SUZUKI ADDRESS V125 Basic L1
- SUZUKI ADDRESS V125 Basic LO
- SUZUKI ADDRESS V125 S L1
- SUZUKI ADDRESS V125 S LO