Fuel Filter, Sealed, Metal, 6.5mm

Metal Block Filter Type
Size: o6.5(Straight Type)
[Specifications]
Insertion Part Inner Diameter: o3.9
Insertion Part Outer Diameter: o6.5
Maximum Diameter: o30.7
Length: 74.6mm
Corresponding Hose Inner Diameter: o6.0-8.5

Shutting out foreign matters of Garbage, Rustetc. In Fuel Tank in advance is the first step of keeping the Engine and lasting it.
Filter was installed in the middle of Fuel hose from Fuel Tank.
Dirt condition can be checked immediately by making it transparent Body.
Hose Measure the inner diameter and select the one fitted with the dimensions of the Filter side insertion part.
Large The size and shape are various, it is selected by considering the installation space.In addition, filter material and filtration method are various, it is necessary to consider Gasoline flow rate etc. necessary for the own vehicle. (Especially Big bike, 2Cycle cars are noted)

* For under 125cc * Maximum outer diameter is the outside diameter of body alignment.
* Overall length is the total length including plug-ins.
* Hose diameter is only a guide.

[Note]
* Is the time to replace non-disassembly type filter blocked the dirt. Check legume so out of gas flow channel blocked by the trash and leave without replacement is required. In situations like that we have also set up orientation should also consider.
* Cannot be used in large-diameter carburetor of FCR, etc.. With a satisfactory amount of gasoline will no longer supply to carburetor.
* Not resistant to heat and for plastic products. Please set up in places not affected by the heat engine, etc.. Heat could transform, etc..
* Each product a specific gasoline flows into route. Please check before installation.
* Insert the hose, please stop to ensure bands. Is the uncertainty and leads to serious accidents and leakage fire petrol.