New Zealand Dollars
Brazilian Real
United States Dollars
Australian $
Japan Yen
Product Description
Manifold Mounting Part Size (Head Side): Pitch 45mm, Intake Port System Φ24
Recommended Carburetor: PC20/PE24
It is possible to mount the PE28/26, CR-MINI, VM26, YD28/24.
Recommended Carburetor: PC20/PE24
It is possible to mount the PE28/26, CR-MINI, VM26, YD28/24.
NEW Hyper head with Long stroke crank (STREET52mm) Combination of High power realized The compression ratio was increased from 11.3:1 to 11.6:1, and the performance improved in the whole area (Relative to DAYTONA).
Crankcase 's Bowling is unnecessary, it is more Reasonable than adding Crank to 88 cBore Up Kit.
Bore XStroke 52 X 52mm = 110cc.
Crankcase 's Bowling is unnecessary, it is more Reasonable than adding Crank to 88 cBore Up Kit.
Bore XStroke 52 X 52mm = 110cc.
*It increases vibrations and engine sound with bore-up.
*Please install oil cooler and oil temperature gauge and manage oil temperature. It may be damage the engine if you run continuously at high temperature (over 100-degrees).
*DAYTONA designated maximum rotation number: 12.000rpm. (10.000rpm in the case of the primary side clutch)
*It is required to replace a carburetor and exhaust system in order to demonstrate the required performance.
*Please use high-octane gasoline for high compression.
*It is recommended to combine with the next simultaneous placement parts as power increases. There is a possibility that the engine may not be able to withstand the increase of power and the engine may be damaged if you use the following parts as OEM parts.
•Mounting parts at the same time.
Secondary Wet Clutch Kit (95021)
Racing Outer Rotor Kit (95033)
Middleweight Outer Rotor Kit (73246)
Mega Oil Pump TYPE 2 (74670)
Reinforced camshaft chain (82 links) (77415)
*Please install oil cooler and oil temperature gauge and manage oil temperature. It may be damage the engine if you run continuously at high temperature (over 100-degrees).
*DAYTONA designated maximum rotation number: 12.000rpm. (10.000rpm in the case of the primary side clutch)
*It is required to replace a carburetor and exhaust system in order to demonstrate the required performance.
*Please use high-octane gasoline for high compression.
*It is recommended to combine with the next simultaneous placement parts as power increases. There is a possibility that the engine may not be able to withstand the increase of power and the engine may be damaged if you use the following parts as OEM parts.
•Mounting parts at the same time.
Secondary Wet Clutch Kit (95021)
Racing Outer Rotor Kit (95033)
Middleweight Outer Rotor Kit (73246)
Mega Oil Pump TYPE 2 (74670)
Reinforced camshaft chain (82 links) (77415)
Suits:
HONDA MONKEY/GORILLA (12V) Z50JN/P/S/T/V/W/X
HONDA MONKEY/GORILLA (6V) Z50JF/J/L
HONDA Monkey Baja Z50JM/N/P
Z50JY/1/2/4/5/6/7
Product Videos
Custom Field
Tax GST Exclusive
