Parts

Thermistor (Taper Screw Sensor) PT

Cord Length: 110mmSensor Mounting Parts: R1/8 Taper Screw DAYTONA Company Thermistor Single Item for Temp meter. * Please note that useable thermistor (established resistance value) will differ depending on the product.* Image is for reference...

Long Throttle Cable, +120mm, Yamaha SR400, SR500 01

120mm longer than OEM

Sensor Fitting for Oil Balance M16 x P1.5

Bolt Size: M16 x P1.5Sensor Mounting Part: R1/8 Used with OEMOil pan drain bolt etc replaced.DAYTONA company Temp meter attached Thermistor (Taper Screw Sensor) Can be installed directly   Fits: SUZUKI BANDIT1200 GV77A 00-05 SUZUKI BANDIT1200 S...

Daytona [NISSIN Repair Parts for Master Cylinder] Master Cylinder Repair Kit

[Product Contents]Piston x 1pc., Boots x 1pc., Primary & Secondary Cup x 1pc./each, Spring x 1pc., Circlip x 1pc., Plate x 1pc.for Φ19 Radialfor Old Radial Brake Master Cylinder (Forged)[Corresponding Master Cylinder]44029/44030/44031/44033 ...

Sensor Fitting for Oil Temp M20 x P1.5

Bolt Size: M20 x P1.5Sensor Mounting Part: R1/8 Used with OEMOil pan drain bolt etc replaced.DAYTONA company Temp meter attached Thermistor (Taper Screw Sensor) Can be installed directly.

Sensor Fitting for Oil Temp M14 x P1.5

Bolt Size: M14 x P1.5Sensor Mounting Part: R1/8 Used with OEMOil pan drain bolt etc replaced.DAYTONA company Temp meter attached Thermistor (Taper Screw Sensor) Can be installed directly.

Sensor Fitting for Oil Temp M14 x P1.25

Bolt Size: M14 x P1.25Sensor Mounting Part: R1/8 Used with OEMOil pan drain bolt etc replaced.DAYTONA company Temp meter attached Thermistor (Taper Screw Sensor) Can be installed directly.

Daytona Sensor Fitting for Oil Temp M12 x P1.5

Bolt Size: M12 x P1.5Sensor Mounting Part: R1/8 Replace with OEM Oil Pan Drain Bolt.Thermistor (Taper Screw Type Sensor) included with DAYTONA Thermometer can be mounted directly. *Only adjusted for 47101/72812. Not adjusted for HONDA APE100/50,...

Bleed Nipple, Stainless Steel, M7x1.0p

Exclusive Standard Rubber CapMaterial: Stainless SteelM7 x P1.0Quantity: 1 Set of 1pc.for TOKIKO Caliper (1 Part) * Rear caliper side and other models can be installed if the same part number.* Please be sure to check Screw diameter and Pitch.* Take...

Bleed Nipple, Stainless Steel, M10x1.0p

for Standaerd Rubber CapMaterial: StainlessM10×P1.0Quantity: 1pc.for Brembo/Lockheed Import Type Caliper * OEM product number may be integrated into other product numbers on Manufacturer side, so even in that case the dimensions do not change so...

Bleed Nipple, Stainless Steel, M8x1.25p

for STD Rubber Cap OnlyStainless SteelM8xP1.251pc.NISSIN/Sumitomo/Brembo (Japanese OEM Vehicle STD Mounting Type) for Tokiko 6 POT (Part)for Hydraulic Clutch Side * Rear caliper side and other models can be installed if the same part number.* Please...

Outlet Set for Oil Cooler, 6V, Honda Gorilla, Monkey

[Product Contents]Banjo Bolt (M10 xP1.25) (Repair Parts:33590)Banjo (Repair Parts:33591)Sealing Washer (Repair Parts:33592)Outlet Port (Repair Parts:35974)Gasket (Repair Parts:35975) for MONKEYOil cooler kit Cylinder head side takeout necessary for...