Shop All

Sensor Fitting for Oil Temp M14 x P1.5

Bolt Size: M14 x P1.5Sensor Mounting Part: R1/8 Used with OEMOil pan drain bolt etc replaced.DAYTONA company Temp meter attached Thermistor (Taper Screw Sensor) Can be installed directly.

Sensor Fitting for Oil Temp M14 x P1.25

Bolt Size: M14 x P1.25Sensor Mounting Part: R1/8 Used with OEMOil pan drain bolt etc replaced.DAYTONA company Temp meter attached Thermistor (Taper Screw Sensor) Can be installed directly.

Daytona Sensor Fitting for Oil Temp M12 x P1.5

Bolt Size: M12 x P1.5Sensor Mounting Part: R1/8 Replace with OEM Oil Pan Drain Bolt.Thermistor (Taper Screw Type Sensor) included with DAYTONA Thermometer can be mounted directly. *Only adjusted for 47101/72812. Not adjusted for HONDA APE100/50,...

Bleed Nipple, Stainless Steel, M7x1.0p

Exclusive Standard Rubber CapMaterial: Stainless SteelM7 x P1.0Quantity: 1 Set of 1pc.for TOKIKO Caliper (1 Part) * Rear caliper side and other models can be installed if the same part number.* Please be sure to check Screw diameter and Pitch.* Take...

Flat Cap Air Breather 1

Quantity: 1pc.Air Breeder(Flat Type) Repair Parts Fits: Universal  

Bleed Nipple, Stainless Steel, M10x1.0p

for Standaerd Rubber CapMaterial: StainlessM10×P1.0Quantity: 1pc.for Brembo/Lockheed Import Type Caliper * OEM product number may be integrated into other product numbers on Manufacturer side, so even in that case the dimensions do not change so...

Daytona Custom Seat, Ribbed, Kawasaki ZRX1100, ZRX1200

Roil TypeCompared measurement to the STD Parts: Approximately 40mm Leather Seatfor STD TankIt corresponds to Seat Lock. Dedicated Material:We used FRPSeat base and Cut SIDE to improve feet and hold properties.Can be used for OEM documents.Only on...

Daytona (Japan) Motorcycle Short Bob Rear Fender, Yamaha Dragstar

LUCAS TypeMaterial: FRPBlack Gel CoatingIncluded Parts: Reflector & Reflector Bracket Compared to the conventional Fat Bob rear fender, it produced a Rear view refreshing at Short.Seat is available for both NORMAL and our Custom seat. *...

Flat Cap Air Breather 2

Quantity: 1pc.Air Breeder(Flat Type) Repair Parts

Bleed Nipple, Stainless Steel, M8x1.25p

for STD Rubber Cap OnlyStainless SteelM8xP1.251pc.NISSIN/Sumitomo/Brembo (Japanese OEM Vehicle STD Mounting Type) for Tokiko 6 POT (Part)for Hydraulic Clutch Side * Rear caliper side and other models can be installed if the same part number.* Please...

Outlet Set for Oil Cooler, 6V, Honda Gorilla, Monkey

[Product Contents]Banjo Bolt (M10 xP1.25) (Repair Parts:33590)Banjo (Repair Parts:33591)Sealing Washer (Repair Parts:33592)Outlet Port (Repair Parts:35974)Gasket (Repair Parts:35975) for MONKEYOil cooler kit Cylinder head side takeout necessary for...

[Repair Secondary Dry Clutch Kit (4 Disc)] Sealing Washer (1 Piece) M12

[Corresponding Product Number on The Photo: 36]Required Quantity: 1pc.Quantity: 1pc.Size: M12 Secondary side dry type Clutch Kit (4disc) It becomes Repair Parts for.