Daytona

Bullet Type Terminal Set, CA/CB103 Type, for Yamaha, 5 pcs

BURNER CONNECTOR <MALE> BLACK (for Kawasaki)

· Kawasaki winker only · Colour: Black · Connector (male) 10 pieces · 2 pole type

C Ring Long Bend Plier

The angle of the claw is 90 ° and the tip closes when you hold it. Pliers for detaching C clip. Tip diameter 1.2 mm.

C Ring Plier Set, 4 pc

Outside, inside shared C ring pliers. Two straight claws and two bending claws (90 °, 45 °) are attached, and it can be used in six ways by changing claws. Usable shaft diameter is 10mm to...

CA/CW 104 Type Double Plug Pin Sleeve Female

Sleeve for CA/CW104 Type Double TerminalFemaleQuantity: 1 Set of 100pcs.

Caliper Mount Bolt, M10X20 P1.25

for Casting 6 POT Caliper (40mm Pitch)Material: StainlessQuantity: 1 Set of 2pcs.Size: M10×20×P1.25 * For cast caliper only.  

Caliper Mount Bolt, M10X25 P1.2

Material: Stainless Quantity: 1 Set of 2pcs. Size: M10×25×P1.25   * For cast caliper only.

Caliper Mount Bolt, M10X25 P1.5

For BREMBO Cut-out CaliperMaterial: StainlessQuantity: 1 Set of 2pcs.Size: M10×25×P1.5  

Caliper Piston Press-In

Tool to return the piston of the calliper when replacing the pad. Thickness width: 39 mm. There are two types of plate thickness of 5 mm and 11 mm. Thick plate side thickness: 5 mm, effective...

Caliper Piston Removal Tool

Use to detach the caliper piston during maintenance. Piston inner diameter 17.5 to 37 mm compatible. Tip height of 13 mm.

Caliper Piston Reverse Blade

Plate width:36.5mm. Plate thickness:2.5mm. Effective length:35mm. Supports up to 4 POT Calliper. * Not suitable for callipers with screw in type piston return mechanism.

Cap Bolt Flange Collar, M6

Color Available: Blue, Red, Gold, Black or Clear/SilverMaterial: Aluminum Anodized FinishingBearing Surface Diameter: Φ16Size: M6 91799 Blue91798 Red91797 Gold91796 Black91795 Clear/Silver