New Zealand Dollars
Brazilian Real
United States Dollars
Australian $
Japan Yen
Product Description
Maximum Speed (Designated by Daytona): 11.000rpm
The 124.8cc of the Large Engine Displacement Volume is the engine ideal for Touring, which generates thick Torque from low rotation, can enjoy it without turning, and achieves low vibration with SPCrank adoption.In order to emphasize durability, lower compression ratio (10.8:1) , CamProfile of Emphasis on Torque of low rotation, Plating cylinder of high endurance is adopted.The compression ratio was raised to 10.5:1 → 10.8:1 and the performance improved in the whole area (Relative to DAYTONA).
*It requires crankcase boring (56.6-56.8mm, depth 27mm). In addition, Daytona does not perform crankcase bowling. Please ask a pro mechanic.
*It increases vibrations and engine sound with bore up.
*Please install oil cooler and oil temperature gauge and manage oil temperature. Continuous running at high temperature (over 100 degrees) may damage the engine.
*There is a possibility that the tire and the head will interfere depending on the combination of under body because the cylinder length is approximately 6mm longer and the hear is larger than OEM.
*It requires replacement of the carburetor and exhaust system in order to demonstrate the required performance.
*Please use high octane fuel for high compression.
*It is recommended a combination of the following simultaneous mounting parts because the power has been increased. The engine may not be able to withstand the increase in power and the engine may be damaged when using the following parts as OEM parts.
•Simultaneously Mounting Parts
Primary Side Reinforced 3 Disc Clutch Kit (95634)
Mega Oil Pump TYPE2 (74670)
Reinforced Camshaft Chain (77415)
*It increases vibrations and engine sound with bore up.
*Please install oil cooler and oil temperature gauge and manage oil temperature. Continuous running at high temperature (over 100 degrees) may damage the engine.
*There is a possibility that the tire and the head will interfere depending on the combination of under body because the cylinder length is approximately 6mm longer and the hear is larger than OEM.
*It requires replacement of the carburetor and exhaust system in order to demonstrate the required performance.
*Please use high octane fuel for high compression.
*It is recommended a combination of the following simultaneous mounting parts because the power has been increased. The engine may not be able to withstand the increase in power and the engine may be damaged when using the following parts as OEM parts.
•Simultaneously Mounting Parts
Primary Side Reinforced 3 Disc Clutch Kit (95634)
Mega Oil Pump TYPE2 (74670)
Reinforced Camshaft Chain (77415)
Suits:
HONDA MONKEY/GORILLA (12V) Z50JN/P/S/T/V/W/X
HONDA Monkey Baja Z50JM/N/P
Z50JY/1/2/4/5/6/7
Product Videos
Custom Field
Tax GST Exclusive
