Hyper Head 88cc Kit

Maximum Speed (Designated by Daytona): 12.000rpm (In the case of the primary side clutch, 10.000 rpm)
Manifold Mounting Part Size (Head Side): Pitch 45mm, Intake Port System Φ24
Recommended Carburetor: PC20/PE24
It is possible to mount the PE28/26, CR-MINI, VM26, YD28/24.
Specified Maximum Rotation Speed (Designated by Daytona) 12.000rpm (In the case of the primary side clutch, 10.000 rpm)

Reasonable, excellent in performance and durability Bore Up Kit with Cylinder head Adjust port shape of IN/EX, up to compression ratio 10.7:1 → 11.0:1 to improve performance in the whole area (Relative to DAYTONA) .NORMAL ratio 3.4 times power up will be achieved.Day Tonalogo to Cyinder Head Laser marking.Manifold By lowering the height of the mounting part, you can now install YD24/28 Carburetor, which could not be installed in the past It was.

*It increases vibrations and engine sound with bore up.
*Please install oil cooler and oil temperature gauge and manage oil temperature when mounting this product.
*Continuous running at high temperature (over 100 degrees) may damage the engine.
*It requires simultaneous mounting parts (Reinforced Clutch, Oil Pump, and Camshaft Chain) separately.
*It requires replacement of the carburetor and exhaust system in order to demonstrate the required performance.
*Please use high octane fuel for high compression.
*It requires combination with next simultaneous mounting parts because the power has been increased.The engine may not be able to withstand the increase in power and the engine may be damaged when using the following parts as OEM parts.
•Simultaneously Mounting Parts
Primary Side Reinforced 3 Disc Clutch Kit (95634)
Mega Oil Pump TYPE2 (74670)
Reinforced Camshaft Chain (77415)

 

Suits:

HONDA JAZZ CA50G/J/N/P/S/H2/J2/LG

HONDA MONKEY/GORILLA (12V) Z50JN/P/S/T/V/W/X

HONDA MONKEY/GORILLA (6V) Z50JF/J/L

HONDA Monkey Baja Z50JM/N/P