Tools

Alligator Clip for Maintenance Charger

Can be used with 65928/68586/71199/76079, sold separately.

Inch Socket Set (short) 12pcs 3/8

Insertion angle: 3/8, with socket rail. Set contents: 12 parts, socket size: 1/4, 5/16, 3/8, 7/16, 1/2, 10 mm, hexagon socket size: 9/16, 5/8, 11/16, 3/4, 13/16, 7/8.

Booster Cable 100A

Suitable battery: 6V / 12V. Rating: 100 A. Length: 1.5 m. Can be used safely pin large bikes such as Harley Davidson. Equipped with insulation sleeve to prevent short between clips.

Caliper Piston Press-In

Tool to return the piston of the calliper when replacing the pad. Thickness width: 39 mm. There are two types of plate thickness of 5 mm and 11 mm. Thick plate side thickness: 5 mm, effective length: 34 mm. Thick board side plate thickness: 11 mm, eff

Clutch Lock Nut Socket 41mm

Size: 41mm Used to remove the clutch nut. You can flatten the load part and fix it firmly to a thin nut. Fits: Honda FAZE 2009, Honda FORZA MF06, Honda FORZA MF07, Honda FORZA MF08, Honda FORZA MF09, Honda FORZA MF10, Honda FUSION.

Clutch Lock Nut Socket 39mm

Size: 39mm Used to remove the clutch nut. You can flatten the load part and fix it firmly to a thin nut.

Small Oil Drain Pan

It fits perfectly with the centre stand of the 4-cycle scooter, easy to change the oil.

Caliper Piston Reverse Blade

Plate width:36.5mm. Plate thickness:2.5mm. Effective length:35mm. Supports up to 4 POT Calliper. * Not suitable for callipers with screw in type piston return mechanism.

Repair Vehicle Wiring with Dust Protection Cap

Wiring total length 500 mm. Can attach to 71199. It can also be used for maintenance charger (65928/68586/76079).

Valve Inserter

A resin protector is attached to the part which becomes the fulcrum so that it can be used also for the wheel which is easy to be scratched such as aluminium wheels. Effective length from bulb mounting part 300 mm.

3 Way, Circlip Pliers

3 way so you do not need to change the tip to match the clip.

Clutch Lock Nut Socket 1/2 34mm

Size 34mm. Clutch lock used to remove nut. Flatten the load part and fix it firmly to a thin nut.